Holiday Gift Guide

Re-newing Floor Restorer, 32-Ounces

Item# 06-0170
$20.00
$10.00

Industrial-strength, petrochemical-free floor cleaner

Quantity:
Availability:
Print

Just one application of this industrial-strength, petrochemical-free formula breathes new life into tired-looking flooring of all kinds, including sealed hardwood floors, vinyl, linoleum, terrazzo tiles, concrete, marble and slate floors.

Floor Renew goes on just like a wax and dries to a brilliant finish that lasts for months. Protect your floor from stains, heel marks and yellowing without buildup. USA.

Floor Renew Features:
  • Rejuvenates and cleans flooring of all kinds, including: hardwood, vinyl, linoleum, terrazzo, concrete, marble and slate
  • Petrochemical-free
  • Industrial-strength
  • One easy-to-apply application
  • Odor-free
  • Stringently tested with The American Society of Testing Materials (ASTM) standards for your assurance of exceptional quality and professional results
  • Underwriters Laboratory, Inc. (UL) listed as to slip resistance

Floor Renew fills in scratches and rejuvenates dull spots on all types of home floors.

Print

Instructions:
1. Clean floor.

2. Pour floor renew directly onto floor.

3. Apply with clean sponge mop or lambswool applicator in moderate coats over entire floor surface (do not work into floor).

4. Allow to dry for 30-45 minutes. A single coat is usually adequate, however, a second coat may be used.

Use on floors only when the product and room temperature are 50° F or higher.

What Surfaces Can be Cleaned With It?
Sealed wood, vinyl, linoleum, no-wax rubber sealed cork, terrazzo, concrete, marble and slate floors.

Care: To maintain, use a damp mop to cleanse floor with mild dish detergent and warm water.

Water Spots: While Floor Renew will add a shine to water spotted areas, it will not remove the spots. Sanding is often necessary to remove water spots. In some cases, re-staining is necessary too.

Notes: This is not meant for outdoor use. It will not be able to provide enough protection from the elements. This product is not a floor cleaner; it must be applied as carefully as a floor finish. It is a good idea to spot check a small inconspicuous area before using on the entire floor.

Cautions: Never apply any other floor finish type product over this product. Irritating to eyes and skin, avoid inhalation. 32 oz. 

Bottle renews 625 square feet

Print
Rated 4.6 out of 5 by 19 reviewers.
Rated 5 out of 5 by miraculous product I have used this product for years, and have recommended it to friends with a Bed and Breakfast. We have remodelled homes with 100 year-old hardwood floors and want a product that is not petroleum-based. One application every few months brings out the character of the floors, adds shine and protects. November 7, 2009
Rated 5 out of 5 by Great buy-great results! We use this product at work in high traffic areas (veterinary practice). We only have time to properly strip and rewax once a year...this product is fantastic for making the floors look great and buying us time until we can do the "big job." If anyone has tried this product and gotten poor results, it's most likely because it wasn't applied correctly! If you apply it PER MNAUFACTURER INSTRUCTIONS, and you can see when you lay it down if the whole area you're treating is covered, you shouldn't get streaks/uncovered spots. You may have to put a second coat on in some cases, but THIS STUFF WORKS! September 5, 2009
Rated 5 out of 5 by Works Great! This product made my 25 year old hardwood floors look ten years younger at least! My two year old had really scraped them up by dragging chairs into the kitchen to help cook. I was worried we would have to pay a lot of money to have them fixed, or just live with them looking awful. Once I put this shine on, they looked 80% better. The catch is, you have to use it about every 3 to 6 months, depending on the wear and tear on your floors. I usually vacuum first, then mop with Murphy’s oil, and then put this product on and let it dry for about 40 minutes. With each coat I've added, the floors have improved further. June 14, 2009
Rated 5 out of 5 by Works great I was amazed by how well this product works. It really has revived our previously dull hardwood floors and it is so easy to use - just mop on. The only down side is that it does have chemical-like odor when it's applied but that goes away in a few hours. January 31, 2009
Rated 5 out of 5 by Best Purchase Ever for Flooring Effective finish for sealed wood floors. Receive rave review from friends and recommend always. Dependable and durable. January 12, 2009
<<prev 2 3 4 next>>
Print
Rated 4.6 out of 5 by 19 reviewers.
Rated 5 out of 5 by miraculous product I have used this product for years, and have recommended it to friends with a Bed and Breakfast. We have remodelled homes with 100 year-old hardwood floors and want a product that is not petroleum-based. One application every few months brings out the character of the floors, adds shine and protects. November 7, 2009
Rated 5 out of 5 by Great buy-great results! We use this product at work in high traffic areas (veterinary practice). We only have time to properly strip and rewax once a year...this product is fantastic for making the floors look great and buying us time until we can do the "big job." If anyone has tried this product and gotten poor results, it's most likely because it wasn't applied correctly! If you apply it PER MNAUFACTURER INSTRUCTIONS, and you can see when you lay it down if the whole area you're treating is covered, you shouldn't get streaks/uncovered spots. You may have to put a second coat on in some cases, but THIS STUFF WORKS! September 5, 2009
Rated 5 out of 5 by Works Great! This product made my 25 year old hardwood floors look ten years younger at least! My two year old had really scraped them up by dragging chairs into the kitchen to help cook. I was worried we would have to pay a lot of money to have them fixed, or just live with them looking awful. Once I put this shine on, they looked 80% better. The catch is, you have to use it about every 3 to 6 months, depending on the wear and tear on your floors. I usually vacuum first, then mop with Murphy’s oil, and then put this product on and let it dry for about 40 minutes. With each coat I've added, the floors have improved further. June 14, 2009
Rated 5 out of 5 by Works great I was amazed by how well this product works. It really has revived our previously dull hardwood floors and it is so easy to use - just mop on. The only down side is that it does have chemical-like odor when it's applied but that goes away in a few hours. January 31, 2009
Rated 5 out of 5 by Best Purchase Ever for Flooring Effective finish for sealed wood floors. Receive rave review from friends and recommend always. Dependable and durable. January 12, 2009
<<prev 2 3 4 next>>
 
© 2014 Gaiam Inc.
All Rights Reserved
Site Map
Privacy Policy | Terms of Use
verisign secured McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams